
Cultivator Tume R640L
A cultivator is a well-known and effective tool for basic tillage. Its history goes back more than 120 years, as the first cultivators with disks were developed in the early 20th century. During this time, the product has been successfully used by farmers, and in the 2020s it is gaining popularity again as an essential tool for tillage.
The modernized R-Series is available as a mounted or trailed cultivator. Regardless of the method of traction, the cultivator's properties remain the same thanks to its four levers. These arms break up, mix and move the soil, but at the same time the mass of soil can move freely to the side and no compaction occurs. Spare parts for the cultivator are available.
The efficiency of the R-Series is unbeatable, especially considering the price range of the machine and the need for traction power.
Advantages of practical use:
- Very suitable for processing fall crops.
- Raises the roots of weeds in the field to dry them out.
- Excellent for applying herbicide against weeds and straw.
- Effective for mulching manure.
- Creates a loose working surface that allows for good water absorption.
- Thanks to its weight distribution, it is possible to modify so-called problematic wet areas.
Technical advantages:
- The structure is very simple and robust. It includes a standard axial suspension as well as well-protected high-quality ball bearings on all shafts.
- It is easy and requires no complicated maintenance. All lubrication points are located in convenient locations.
- Low unladen weight and low traction requirements compared to a disc cultivator.
Economic advantages:
- Cost-effective - the ratio of price to performance. For example, with a working width of 6.4 m and a working speed of more than 15 km/h, the productivity can reach up to 9 hectares/hour.
- Low requirement for traction power.
Technical characteristics of the Tume R640L cultivator
Towing method | Mounted |
Working width, m | 6,4 |
Transport width, m | 2,77 |
Weight, kg | 1800 |
Number of knife axes | 4 |
Number of knife crosses | 68 |
Knife length, cm | 42,5 |
Power requirement, not less than kW | 115 |
Spring-loaded axle with spring mounting | Yes |
Ball bearing housings | Yes |
Useful links:
The simple structure, efficiency and compactness in transportation make the Tume R640L cultivator an ideal choice for agricultural work, providing high-quality soil cultivation and saving resources.
Add a comment
Comments
There are no comments yet. Be the first to comment.
You must be logged in to post a comment
Login