![Olimac Drago 2](https://backend.bas.ua/?folder=images&tip=webp&wimg=olimac-drago-2.jpg)
Olimac Drago 2 maize header
If you are looking for a high-quality corn header, the Olimac Drago 2 is a reliable choice for farms of all sizes. Let's take a look at the main advantages and features of the Olimac Drago 2 header, which uses an innovative approach to ensure high quality harvesting.
Advantages of the Olimac Drago 2 header
Compactness and ease of transportation
One of the advantages of the Olimac Drago 2 is its compactness and ease of transportation. The header is in the transport position with a folding arm that allows you to easily move it between fields. This makes it an ideal choice for farmers who work a large area of land.
Optimal shaft length and minimum tilt angle
One of the key features of this header is its shaft, which has an optimal length of 67 centimeters. The minimum angle of inclination of the shaft is only 18 degrees, which makes it ideal for ensuring high-quality corn harvesting. The lower the inclination, the better the harvest, as the corn remains more upright, reducing losses.
Precision cutting
The Olimac Drago 2 is equipped with four bolted knives that work like scissors. The knives move on top of each other to create particles 5-10 centimeters long. This method of cutting ensures high quality corn harvesting and there is no need for additional tools to cut the stalks.
Minimal impact and compensation of the kickback effect
One of the key advantages of this header is the minimal impact and compensation of the kickback effect. The header is equipped with special oval-shaped upper and lower plates. This reduces damage to the corn during harvesting as the plates move and minimizes grain loss.
Efficient drive and reliability
The header is driven by a gearbox cylinder. The gearboxes are mounted on large diameter shafts, which transmit the torque to the next gearbox cylinder. This system reduces the load on the drive train, increases efficiency and saves fuel, and ensures high quality of the cutterbar.
Spare parts for the Olimac Drago 2 header
List of popular spare parts for Olimac headers:
- Rubber cape chain pad 2BC0040KA2 for Olimac header.
- Right hand side tip DR14210 for Olimac header.
- Hub DR6010 Compatible with Olimac.
- Pinion shaft Z-13 DR7050 Compatible with Olimac header.
- Z-12 DR7150 shaft gear Compatible with Olimac.
- Bevel gear Z-20 DR7210 for Olimac header.
- Flange for undercutting knives under the cone DR12290 Compatible with Olimac headers.
Features of the Olimac Drago 2 header
The first feature of the Olimac Drago 2 is the automatic system for adjusting the spacing between the cutterbars, which adapts to the size of the corn stalks and reduces the loss of ears and grain. The plates also have shock absorbers that soften the impact of the ears and prevent them from crumbling. The Drago 2 works almost parallel to the ground, so it can harvest corn low above the surface and leave short stumps.
The second feature of the Olimac Drago 2 is the longer stalk gripper rollers, which allow for slower and more delicate picking of the ears without tearing or shaking. The rollers have precision-machined hacksaws that lower the stalks vertically without transmitting vibrations to the spikelet. This prevents premature ear loss.
The third feature of the Olimac Drago 2 header is its flat tilt angle and tapered chains that cope well with fallen corn. The chains aggressively grip the corn, but release it as soon as the ear is harvested. This prevents excess plant material from entering the combine and facilitates the threshing process. The Drago 2 can be optionally equipped with a stalk chopper, which is positioned centrally in the row and covers the entire working width of the header. The chopper runs directly on the main gearbox without the use of angular gears, so there is no loss of power.
The fourth feature of the Olimac Drago 2 is its safe and durable drive. Each row is protected by a separate slip clutch and the drive chains are double-stranded. Each row has a 4.5 kg liquid lubricant reservoir that feeds the main gearbox and chopper. The lubrication level is easily checked using a special dipstick. In addition, the modular design of the headers and easy access to all components facilitate service and maintenance.
The fifth feature of the Olimac Drago 2 is the drive train design, which distributes the torque between the gears and reduces the load on the shaft. This allows the header to turn more easily, work more efficiently, save fuel and ensure high quality work.
The Olimac Drago 2 is a high-quality and innovative corn harvester that takes into account different field conditions and farmer's needs. It has an automatic system for adjusting the spacing between the plates, long rollers for gripping the stems, a flat tilt angle and tapered chains for collecting fallen corn, a safe and durable drive and a reaper drive circuit that distributes torque. The Drago 2 can also be equipped with a stalk chopper for better decomposition of plant material.
The Olimac Drago 2 is a classic maize header that is characterized by high quality, reliability and efficiency. The Olimac Drago 2 is a modern, innovative header that offers a number of advantages for farmers. Its compact size, precise cutting, minimal impact and reliable drive make it an excellent choice for corn harvesting. If you are looking for quality and performance, the Olimac Drago 2 is your best ally in the field.
Add a comment
Comments
There are no comments yet. Be the first to comment.
You must be logged in to post a comment
Login