
Laser-Clad Knives for Geringhoff PCA Corn Headers
Bas-Agro manufactures standard replacement knives for Geringhoff PCA corn headers and makes custom knives to a drawing or sample. We use laser cladding to apply a layer of wear-resistant metal directly to the cutting edge. This slows abrasive wear and helps the knife retain its cutting profile for longer.
How the Geringhoff PCA corn header works
Geringhoff PCA is a series of row-crop headers designed for harvesting corn for grain. Row dividers guide the plants into the row units. Deck plates strip the ears from the stalks, and gathering chains carry them to the cross auger. The auger collects the ears from all row units and feeds them into the combine’s feederhouse.
Each PCA row unit has an integrated stalk chopper. As the stalk passes through the cutting zone, the rotor knives chop it against a stationary counterknife. The ears continue into the combine, while the chopped stalks remain in the field. The series includes the PCA 400, PCA 600 and PCA 800B, as well as the folding PCA 600F and PCA 800FB.
Which Geringhoff PCA parts are subject to wear?
When preparing the header for harvest, start by inspecting the parts that cut the stalks or guide crop material through the row units.
| Part | What to look for |
|---|---|
| Rotor knives | Dull or chipped edges and changes to the cutting profile. If the header starts leaving longer stalk pieces or sections of uncut stalks, inspect the knives and counterknife together. |
| Counterknives | Wear or damage along the working edge. The condition of this edge also affects cut quality, so check the counterknife when replacing rotor knives. |
| Gathering chains | Chain elongation, stiff links and damaged gathering lugs. If the chain can no longer be tensioned properly, check the tensioner and guides as well. |
| Chain sprockets and guides | Worn sprocket teeth, wear on the guides and play in the idler sprocket bearing. Check these parts when inspecting the chain. |
| Deck plates | Worn working edges and deformation. Check that the gap between the plates meets the specified settings along the length of the row unit. |
How laser cladding protects the cutting edge
Dust and fine soil particles enter the cutting zone along with the stalks. As these particles rub against the edge, they gradually wear away the metal. A worn edge cuts fibrous stalks less cleanly, leaving a less uniform chop.
During laser cladding, we deposit an additional layer of metal directly onto the cutting edge. The layer’s higher resistance to abrasive wear helps preserve the edge geometry for longer. Our short video shows the cladding process and a close-up of the knife edge.
How to order knives for Geringhoff PCA corn headers
To help us identify the standard replacement knife you need, send us the part number. If you don’t know the part number, send the header model and a photo of its identification plate. For a custom knife, you can provide a drawing or a sample.
We ship throughout Ukraine. For orders or help identifying the right part, call +38 (067) 470-35-44.
Browse the Geringhoff header parts catalogue.
Add a comment
Comments
There are no comments yet. Be the first to comment.

You must be logged in to post a comment
Login