Popular Agricultural Machinery Spare Parts: What Farmers Ordered Most Often in July 2026

July is one of the most intense months for agricultural producers. During this period, some farms are already harvesting, others are preparing machinery for the next field operations, and repair teams increasingly deal not with scheduled maintenance, but with urgent replacement of parts that directly affect machine performance during the season.

That is why demand for spare parts in July clearly shows which agricultural machinery components are under the greatest load. These are not always large assemblies or complex mechanisms. Quite often, relatively small parts play a key role: a disc mounting kit, a chain drive sprocket, a suspension bushing, or a scraper for a working unit. If such a part is worn or damaged, the machine may lose productivity, operate unevenly, or stop completely in the field.

In July 2026, among the popular items on the BAS-Agro website were the G15226600 disc mounting kit for Gaspardo equipment, the Z-11 12-052608 gathering-chain drive sprocket for Ziegler, the 87689147 sprayer suspension bushing for CNH, and the 502857 scraper for Geringhoff. These spare parts belong to different machinery groups, but they have one common feature: they operate in units exposed to high mechanical loads and natural seasonal wear.

G15226600 Disc Mounting Kit for Gaspardo

The G15226600 disc mounting kit is a spare part for the disc unit of a seeder, compatible with Gaspardo machinery. In the BAS catalogue, this item is listed as a disc mounting kit with part numbers G15226600 / 15226600. The part is manufactured as a BAS in-house analogue in Ukraine and is supplied new.

Demand for such kits is easy to explain by the operating conditions of seeding equipment. Disc working bodies operate in direct contact with soil, crop residues, dust, and abrasive particles. Over time, not only the discs themselves wear out, but also mounting elements, seating surfaces, bushings, and other parts responsible for the stable position of the disc in the working unit.

For a seeder, this is critically important. If the disc mounting has play or has lost seating accuracy, it can affect the stability of the working body, the quality of furrow formation, seed placement uniformity, and the overall performance of the seeding section. At first glance, such a component may seem secondary, but in seeding machinery, the accuracy of each disc unit directly determines the quality of the agronomic operation.

In July, such kits are often ordered not only for current repairs, but also for preparing machinery for the next season. After intensive seeder operation, it is advisable to inspect the condition of discs, mountings, bearing units, and related components so that hidden problems are not carried over into the next sowing campaign.

The G15226600 disc mounting kit for Gaspardo can be purchased on the BAS product page: https://bas.ua/shop/compatible-with-gaspardo-000000005-1/disc-kit-00000016709

Z-11 12-052608 Gathering-Chain Drive Sprocket for Ziegler

The Z-11 12-052608 gathering-chain drive sprocket is a chain drive component compatible with Ziegler machinery. In the BAS catalogue, it is listed with part numbers 12-052608 / 12052608. This is a new spare part manufactured as a BAS in-house analogue in Ukraine.

Such sprockets are used in drives where rotational motion is transmitted to a chain. In the case of headers and harvesting machinery, this unit operates under constant cyclic load. The sprocket works in contact with the chain and is exposed to shocks, contamination, dust, crop residues, and uneven loads during field operation.

Sprocket wear often develops gradually. At first, there may be increased noise, uneven chain movement, vibration, or accelerated chain elongation. If operation continues with a worn sprocket, the risk of chain skipping, damage to adjacent drive components, and emergency header downtime increases.

For farmers, this part is especially important during the season. During harvesting, even a short downtime period can be costly, so chain drives, sprockets, tensioners, and guides should be checked in advance. If the sprocket teeth show visible wear, deformation, or asymmetrical shape, it is better to replace the part before it causes damage to the chain or drive unit.

The Z-11 12-052608 gathering-chain drive sprocket for Ziegler can be purchased on the BAS product page: https://bas.ua/shop/compatible-with-ziegler-000000076-1/sprocket-z-11-00000713530

87689147 Sprayer Suspension Bushing for CNH

The 87689147 sprayer suspension bushing is a popular spare part for CNH machinery. In the BAS catalogue, it is listed as the 87689147 CNH sprayer suspension bushing, product code MED00002481. This is a new spare part manufactured as a BAS analogue in Ukraine.

In terms of technical characteristics, this part corresponds to the format of a nylon bushing / plain bearing. For part number 87689147, the following dimensions are specified: inner diameter — 90.65 mm, outer diameter — 95.35 mm, length — 90 mm. This type of material is used in units where low friction, abrasion resistance, and the ability to operate without constant lubrication are important.

In the sprayer suspension, the bushing performs an important function: it ensures stable operation of the moving joint, reduces friction between parts, and helps compensate for loads that occur when the machine moves across the field. A sprayer constantly operates on uneven surfaces and is exposed to vibration, side loads, impacts, and oscillations. If the bushing is worn, play appears in the joint and the load on adjacent parts increases.

The specific feature of suspension bushings is that their wear is not always immediately visible from the outside. However, during operation, it can affect machine travel stability, the service life of pivot joints, and the overall condition of the suspension. Therefore, such parts should be checked not only after obvious faults appear, but also during scheduled machinery inspection.

In July, demand for sprayer suspension bushings is logical: sprayers often work in difficult conditions throughout the season, and worn suspension elements are better replaced before they lead to more expensive repairs.

The 87689147 sprayer suspension bushing for CNH can be purchased on the BAS product page: https://bas.ua/shop/compatible-with-cnh-000000091-1/bushing-med00002481

502857 Scraper for Geringhoff

The 502857 scraper is a spare part for Geringhoff headers that performs an auxiliary but very important function in the working area of the machine. In the BAS catalogue, this item is listed as the 502857 Geringhoff scraper. The part belongs to BAS in-house manufactured spare parts for Geringhoff headers.

Scrapers in headers operate in the zone where the machine comes into contact with crop material. Their task is to prevent excessive accumulation of stalks, leaves, chopped residues, and contamination near the working elements. In corn headers, this is especially important because crop material can quickly accumulate around rotors, augers, chains, and other moving units.

A worn or damaged scraper may perform its function less effectively. As a result, the risk of clogging in the working area increases, the load on adjacent parts grows, and the stability of crop material feeding deteriorates. During the corn harvesting season, such a fault can lead to downtime and, in some cases, damage to other header components.

The practical value of a scraper lies in the fact that it is a relatively small part that helps maintain the normal operating mode of the entire unit. That is why it should be inspected when preparing the header for the season, as well as after operation in difficult conditions when the machine works with large amounts of dry or wet crop mass.

In the BAS catalogue, the 502857 Geringhoff scraper is supplied with a manufacturer’s warranty of one working season or 1,000 hectares. This is important for farms that plan not just a one-time replacement, but predictable part performance under seasonal load.

The 502857 scraper for Geringhoff can be purchased on the BAS product page: https://bas.ua/shop/compatible-with-geringhoff-000000023-1/stripper-for-rotor-auger-00000040829

What Demand for These Spare Parts Shows

The popularity of these four items in July 2026 clearly reflects the general logic of seasonal agricultural machinery repair. Farmers most often look for parts used in constantly wearing units: disc elements of seeders, chain drives of headers, sprayer suspension bushings, and scrapers for working units.

These are exactly the components that do not always attract attention during a general machinery inspection, but directly affect the stable operation of the machine. If such a spare part fails during the season, the machine may be idle at the very moment when every hour matters.

Therefore, when selecting spare parts, it is important to focus not only on the part name, but also on the part number. For Gaspardo, this is G15226600 / 15226600; for Ziegler — 12-052608 / 12052608; for CNH — 87689147; for Geringhoff — 502857. The part number helps select the required item more accurately, especially when the machinery has different modifications, production years, or working unit configurations.

Agricultural Machinery Spare Parts on the BAS-Agro Website

On the BAS-Agro website, customers can buy spare parts for different types of agricultural machinery: seeders, headers, combines, sprayers, tillage equipment, fertilizer spreaders, and other machines. The catalogue includes both original spare parts and BAS in-house manufactured analogues.

In-house production allows BAS-Agro to manufacture spare parts according to a sample or drawing, as well as offer ready-made items from stock. For farmers, this is especially important during the season, when machinery must operate without long downtime and the required part must be received quickly and accurately by part number.

BAS-Agro works with a wide range of agricultural machinery spare parts and helps select solutions for repair, maintenance, and restoration of working units. If the required part is available in the catalogue, it can be ordered directly on the website. If an analogue or production according to a sample is needed, the company’s specialists can help with selection and manufacturing for specific machinery.